WE offer effective protection

.

Regarding to a company IĮ InSpe production distribution transfer to UAB Baltic Masks these are the products wich were made by IĮ InSpe but legaly can be used and sold by a company UAB Baltic Masks :

- BM-810 - 3 layer TYPE IIR medical disposable face masks for children.

- BM-920 - 3 layer TYPE IIR medical disposable face masks.

- BM-001V - 5 layer FFP2 respiratos with valve.

- BM-002 - 4 layer FFP2 respirators without valve.

- BM-003 5 layer FFP2 respiratoris without valve.

- BM-003V - 5 layer FFP2 respiratos with valve.

- BM-033V - FFP3 respirators with valve and adjustable headband.

All the production is sertified by a notified body and valid to use.


You can find more information on a link below.

CONFIRMATION REGARDING THE TRANSFER OF BUSINESS
CONFIRMATION_REGARDING_THE_TRANSFER_OF_BUSINESS

stopped production


Same safety class and characteristics as our FFP2 respirator with extra comfort because of our new valve technology which helps with effective removal of heat and provides a cooler and more comfortable wear, removes exhaled air, and minimizes the risk of misting eyewear. Adjustable nose bridge and elastic ear loop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5mm and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

3D three-dimensional design with fluffy, breathable and soft, will not cause the fog when wearing glasses. Adjustable nose bridge and elastic earloop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5mm and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

3D three-dimensional design with fluffy, breathable and soft, will not cause the fog when wearing glasses. Adjustable nose bridge and elastic earloop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5mm and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

Same safety class and characteristics as our FFP2 respirator with extra comfort because of our new valve technology which helps with effective removal of heat and provides a cooler and more comfortable wear, removes exhaled air, and minimizes the risk of misting eyewear. Adjustable nose bridge and elastic ear loop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5mm and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

3D three-dimensional design with fluffy, breathable and soft, will not cause the fog when wearing glasses. Adjustable nose bridge and elastic earloop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

Same safety class and characteristics as our FFP2 respirator with extra comfort because of our new valve technology which helps with effective removal of heat and provides a cooler and more comfortable wear, removes exhaled air, and minimizes the risk of misting eyewear. Adjustable nose bridge and elastic ear loop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW

Same safety class and characteristics as our FFP2 respirator with extra comfort because of our new valve technology which helps with effective removal of heat and provides a cooler and more comfortable wear, removes exhaled air, and minimizes the risk of misting eyewear. Adjustable nose bridge and elastic ear loop has enough elasticity to make a good seal. Protection-class face masks are made for environments in which harmful and mutagenic particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 95 % of particles measuring larger than 0.5mm and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

BUY NOW
BM-810 DISPOSABLE FACE MASK
  • Bacterial Filtration Efficiency > 98%
  • Particulate Filtration Efficiency ≥ 98 %

Advanced Filter Media:
  1. 25gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 25gsm Spunbond Nonwoven
Typical Applications:

Three-ply material is made up of a 25gsm melt-blown polymer, most commonly polypropylene, placed between non-woven fabric.The melt-blown material acts as the filter that stops microbes from entering or exiting the mask. Pleats are commonly used to allow the user to expand the mask such that it covers the area from the nose to the chin. The masks are secured to the head with ear loops, head ties, or elastic straps.

BalticMaks children disposable medical face masks
BM-920 DISPOSABLE FACE MASK
  • Bacterial Filtration Efficiency > 98%
  • Particulate Filtration Efficiency ≥ 98 %

Advanced Filter Media:
  1. 25gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 25gsm Spunbond Nonwoven
Typical Applications:

Three-ply material is made up of a 25gsm melt-blown polymer, most commonly polypropylene, placed between non-woven fabric.The melt-blown material acts as the filter that stops microbes from entering or exiting the mask. Pleats are commonly used to allow the user to expand the mask such that it covers the area from the nose to the chin. The masks are secured to the head with ear loops, head ties, or elastic straps.

Model: BM-001V

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40-50gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

Model: BM-002

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 40gsm Meltblown Nonwoven
  3. 25gsm Spunbond Nonwoven
  4. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

bm_002_1
Model: BM-003

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40-50gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

IMG_5502

This protective FFP2 respirator is designed to protect the wearer from various types of infections, viruses, airborne bacteria and even pollution, dusts.

This mask has a breathing valve. A breathing valve is beneficial to avoid moisture and improve exhaling capability. It also can help reduce the fog on eyeglasses.

FFP2 respirator fits perfectly to the face, which provides high-quality protection. This face mask can provide very good protection for up to 8 hours.

Filters at least 95 percent. particles in the air. Inbound penetration is a maximum of 8%.

The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.

  • With a clip in the nose area and rubber straps around the ears;
  • Folding flat mask;
  • Breathing valve: Yes;
  • Classification: FFP2 (corresponds to US N95);
  • EU declaration of conformity: EN149: 2001 + A1: 2009;
  • CE marking.
Material 5 layer (25gsm / 50gsm spunbond nonwoven; 25gsm / 25gsm meltblown nonwoven; 40-50gsm hot air nonwoven)
Filtration efficiency More than 95%
Marking EN 149:2001+A1:2009; FFP2
Duration of use NR – single use (no more than one shift)
Exhalation valve Yes
Weight 6 grams
Size Universal size (package size 145x60x126mm)
Shelf life 2 years
Manufacturer Baltic Masks, China
Important information Used products must be disposed of as hazardous waste

Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber bands towards the ears and put on;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.

Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.

Weight 0.08 kg
Dimensions 14.5 × 8 × 12.6 cm
Size

universal size

 

Model: BM-003V

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40-50gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

IMG_5510
This protective FFP3 respirator is designed to protect the wearer from various types of infections, viruses, airborne bacteria and even pollution, dusts. The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging. FFP3 respirator fits perfectly to the face, which provides high-quality protection. This face mask can provide very good protection for up to 8 hours. Filters above 99 percent. particles in the air. 
  • With a nose bridge and a strap behind a head;
  • Cup shape;
  • Breathing valve: Yes;
  • Classification: FFP3;
  • EU declaration of conformity: EN149: 2001 + A1: 2009;
  • CE marking.
Material 4 layer (180gsm spunlace nonwoven fabric; 40gsm meltblown fabric; 40gsm meltblown fabric; 150gsm spunlace nonwoven fabric)
Filtration efficiency Above 99%
Marking EN 149:2001+A1:2009; FFP3
Duration of use NR - single use (no more than one shift)
Exhalation valve Yes
Weight 24 grams
Size One size (package size  20x17x14)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste
Users manual: 1. Wash or disinfect hands before taking out the mask off a package. Avoid touching the inner surface of the mask. 2. Place respirator agains your face, with the bottom under chin and metal nose clip across a bridge of nose. 3. Pull the bottom head band over your head and place around the neck below the ears. 4. Pull the top head band over your head and place at the top behind your head. 5. Use both hands to bend the metal nose clip to fit snugly against your nose and face. The respirator can fit as well if you pinch the metal nose clip using two hands. Slide fingers down both sides or metal nose clip to seal it against your nose and face. 6. Do not touch the mask while using. If so, wash or disinfect your hands. Precautions: 1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols; 2. This product does not generate oxygen and is not intended for use in a low pressure environment; 3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask; 4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately; 5. This product is disposable. The recommended duration of use is 4-8 hours.
Respirator Weight 0.32 kg
Package Dimensions 20 × 14 × 17 cm
Respirator Size Universal size
Model: BM-033V

Advanced Filter Media:
  1. 180gsm spun lace non-woven fabric
  2. 40gsm Meltblown Nonwoven
  3. 40gsm Hot air Nonwoven
  4. 40gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

033v

EXPERIENCE AND SUPPLIERS

LOGISTICS

During more than 20 years of cooperation with the Far Eastern market and the organization of the supply of goods in the Baltic States, we have accumulated many years of experience. Experience allow us to guarantee reliability and security for our customers. We are happy to supply customers with high quality products. We manufacture goods or import them directly from the manufacturer, so we always offer products at the lowest price on the market.

In order to shorten the supply time of receipt products, we work with the strongest market leaders in this field, whose quality of service and work has never disappointed us. Cooperation based on trust and teamwork is a guarantee of quality. Together, we pursue a common goal - to supply and transport goods at the lowest market price.

CONTACT US

“Baltic Masks” sales team is in a stage of active search of authorized partners all over Europe, who could work in the name of “Baltic Masks” (InSpe) and participate in government procurement tenders for Personal Protection Equipment (FFP2 face masks). If you are interested in cooperation please ask for dealership application form.



    COMPANY DETAILS

    Baltic Masks, UAB
    Registration number: 305709371
    VAT code: LT100013839515
    Account No .: LT34 3500 0100 1152 5155, Paysera LT, Bank code: 35000,
    SWIFT: EVIULT21XXX Account No 2 .: LT097300010166911771, Swedbank LT,
    SWIFT: HABALT22

    +37065992104

    [email protected]
    en English
    nl Dutchen Englishde Germanit Italianlv Latvianlt Lithuanianru Russian