WE offer effective protection

.

Based on the successful work experience of our suppliers and partners, we have launched FFP2 half-folded masks production and supply line in the Baltic States. Products we offer is strongly related to good health and proper protection. We believe that health is one of the most important things, so our main goal is to supply high quality products at the lowest price on the market.


PRODUCTION CAPACITY


More than 45 000 000 FFP2 half fold face masks per month;

TECHNICAL CHARACTERISTICS


FFP2 half fold masks Made in Europe
Certification EN149:2001+A1:2009
CE Certification PPE Notified Body 1463


HALF-FOLD FACE MASKS


Particle filtering half mask BM-001 protection-class FFP2 NR D is made for environments in which harmful particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 94% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

Medical particle filtering half mask BM-026 protection-class FFP2 NR D is made for environments in which harmful particles can be found in the air we breathe. The main intended use of medical particle filtering half masks us a medical device (protection-class Type IIR) is to protect the patient from infective agents and, additionally, in certain circumstances to protect the wearer against splashes of potentially contaminated liquids. Medical particle filtering half masks may also be intended to be worn by patients and other persons to reduce the risk of spread of infections, particularly in epidemic or pandemic situations. Respiratory protective device of this class provides a barrier to at least 94% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Bacterial filtration efficiency (BFE) ≥98%. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

Particle filtering half mask BM-027 protection-class FFP2 NR D is made for environments in which harmful particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 94% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

Particle filtering half mask BM-027V (with valve) protection-class FFP2 NR D is made for environments in which harmful particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 94% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

Particle filtering half mask BM-031 protection-class FFP3 NR D is made for environments in which harmful particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 99% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

Particle filtering half mask BM-031V (with valve) protection-class FFP3 NR D is made for environments in which harmful particles can be found in the air we breathe. Respirator masks of this class provide a barrier to at least 99% of particles measuring larger than 0.3 micron and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Our filter system, with layer of meltblown cloth, protects wearers from unpleasant odors and particles on top of the required breathing protection. A properly adjusted clip will prevent exhaled air escape from inside of the respirator and will protect against fogging if used with glasses or another eye protection.

BUY NOW

This 5-layer FFP2 respirator is designed to protect against acute upper respiratory tract infections and other airborne infections, dust, and smoke. It fits perfectly to the face, which provides high-quality protection.

Our filter system, with two layers of melt-blown cloth, protects wearers from unpleasant odours and particles on top of the required breathing protection. The masks are comfortable, skin-friendly, and do not cause difficulty breathing.

Filters at least 95 %. particles in the air. Inbound penetration is a maximum of 8%.

The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.

  • With a clip in the nose area and rubber straps around the ears;
  • Folding flat mask;
  • Breathing valve: no;
  • Classification: FFP2 (corresponds to US N95);
  • EU declaration of conformity: EN149: 2001 + A1: 2009;
  • CE marking.
Material 5 layer (25gsm / 50gsm spunbond nonwoven; 25gsm / 25gsm meltblown nonwoven; 40-50gsm hot air nonwoven)
Filtration efficiency More than 95%
Marking EN 149:2001+A1:2009; FFP2
Duration of use 4-8 hours NR – single use (no more than one shift)
Exhalation valve No
Respirator Weight 5 grams
Size One size (package size 185x240x25mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste

Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber bands towards the ears and put on;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.

Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.

Respirator Weight 0.05 kg
Package Dimensions 18.5 × 24 × 2.5 cm
Respirator Size Universal size

 

Model: BM-001

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40-50gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

This FFP2 mask/respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles so it provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP2 mask/respirator provide a barrier to at least 94% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Respirators are also used in healthcare facilities.

All in all these masks are suitable for reducing the chances of getting coronavirus infection and more.

The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.

  • With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
  • Folding flat mask;
  • Breathing valve: No;
  • Classification: FFP2 (corresponds to US N95);
  • EU declaration of conformity: EN 14683:2019+AC:2019 TYPE IIR, EN149:2001+A1:2009
  • CE marking.
Material 3 layer (50gsm/ 25gsm spunbond nonwoven; 25gsm meltblown nonwoven)
Filtration efficiency More than 94%
Marking EN 14683:2019+AC:2019 TYPE IIR, EN149:2001+A1:2009
Duration of use 4-8 hours NR – single use (no more than one shift)
Exhalation valve No
Respirator weight 3.5 grams
Size One size (package size 185x240x25mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste
Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.
Respirator Weight 0.035 kg
Package Dimensions 18.5 × 24 × 2.5 cm
Respirator Size Universal size

 

Model: BM-026

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, medical respirator, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

This FFP2 respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles. It provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP2 respirator provide a barrier to at least 94% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Respirators are also used in healthcare facilities.

These masks are suitable for reducing the chances of getting coronavirus infection. The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.
  • With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
  • Folding flat mask;
  • Breathing valve: No;
  • Classification: FFP2 (corresponds to US N95);
  • EU declaration of conformity: CE 1463, EN149: 2001 + A1: 2009, COVID-19 PPE-R / 02.075-V2;
  • CE marking.
Material 4 layer (25gsm / 50gsm spunbond nonwoven; 40gsm meltblown nonwoven; 40gsm hot air nonwoven)
Filtration efficiency More than 94%
Marking EN 149:2001+A1:2009; FFP2
Duration of use 4-8 hours. NR – single use (no more than one shift)
Exhalation valve No
Respirator Weight 5 grams
Size One size (package size 185x240x25mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste
Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.
Respirator Weight 0.05 kg
Package Dimensions 18.5 × 24 × 2.5 cm
Respirator Size Universal size

 

Model: BM-027

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 40gsm Meltblown Nonwoven
  3. 40gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

This FFP2 respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles. It provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP2 respirator provide a barrier to at least 94% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Respirators are also used in healthcare facilities.

These masks are suitable for reducing the chances of getting a coronavirus infection.

The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.

  • With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
  • Folding flat mask;
  • Breathing valve: YES;
  • Classification: FFP2 (corresponds to US N95);
  • EU declaration of conformity: CE 1463, EN149: 2001 + A1: 2009, COVID-19 PPE-R / 02.075-V2;
  • CE marking.
Material 4 layer (25gsm / 50gsm spunbond nonwoven; 40gsm meltblown nonwoven; 40gsm Hot air Nonwoven)
Filtration efficiency More than 94%
Marking EN 149:2001+A1:2009; FFP2
Duration of use NR – single use (no more than one shift)
Exhalation valve YES
Respirator Weight 7,5 grams
Size One size (package size 185mm x 240mm x 25mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste

Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.

Respirator Weight 0.07 kg
Package Dimensions 18.5 × 24 × 2.5 cm
Respirator Size Universal size

 

Model: BM-027V

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 40gsm Meltblown Nonwoven
  3. 40gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

This FFP3 respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles. It provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP3 respirator provide a barrier to at least 99% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

These masks are suitable for reducing the chances of getting a coronavirus infection. The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.
  • With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
  • Folding flat mask;
  • Breathing valve: No;
  • Classification: FFP3 (corresponds to US N99);
  • EU declaration of conformity: EN149: 2001 + A1: 2009, COVID-19 PPE-R / 02.075-V2;
  • CE marking: CE 1463
Material 5 layer (25gsm / 50gsm spunbond nonwoven; 25gsm/25gsm meltblown nonwoven; 40gsm hot air nonwoven)
Filtration efficiency More than 99%
Marking EN 149:2001+A1:2009; FFP3
Duration of use 4-8 hours. NR – single use (no more than one shift)
Exhalation valve No
Respirator Weight 5 grams
Size One size (package size 185x240x25mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste
Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.
Respirator Weight 0.05 kg
Package Dimensions 18.5 × 24 × 2.5 cm
Respirator Size Universal size

 

Model: BM-031

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

This FFP3 respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles. It provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP3 respirator provide a barrier to at least 99% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration.

These masks are suitable for reducing the chances of getting a coronavirus infection. The respirator is designed to be used together with other personal protective equipment (safety glasses, protective shields, etc.), a properly adjusted nose clip will protect them from fogging.

  • With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
  • Folding flat mask;
  • Breathing valve: No;
  • Classification: FFP3 (corresponds to US N99);
  • EU declaration of conformity: EN149: 2001 + A1: 2009, COVID-19 PPE-R / 02.075-V2;
  • CE marking: CE 1463
Material 5 layer (25gsm / 50gsm spunbond nonwoven; 25gsm/25gsm meltblown nonwoven; 40gsm hot air nonwoven)
Filtration efficiency More than 99%
Marking EN 149:2001+A1:2009; FFP3
Duration of use 4-8 hours. NR – single use (no more than one shift)
Exhalation valve Yes
Respirator Weight 7,5 grams
Size One size (package size 185x240x40mm)
Shelf life 2 years
Manufacturer Baltic Masks, Lithuania
Important information Used products must be disposed of as hazardous waste
Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.
Respirator Weight 0.075 kg
Package Dimensions 18.5 × 24 × 4 cm
Respirator Size Universal size

 

Model: BM-031V

Advanced Filter Media:
  1. 50gsm Spunbond Nonwoven
  2. 25gsm Meltblown Nonwoven
  3. 40gsm Hot air Nonwoven
  4. 25gsm Meltblown Nonwoven
  5. 25gsm Spunbond Nonwoven
Typical Applications:

Personal Protection, Base Metal Manufacture, Pharmaceuticals, Laboratories, Foodstuffs e.g. Bagging, Powdered Additives, Powdered Chemicals, Sawmills

EXPERIENCE AND SUPPLIERS

LOGISTICS

During more than 20 years of cooperation with the Far Eastern market and the organization of the supply of goods in the Baltic States, we have accumulated many years of experience. Experience allow us to guarantee reliability and security for our customers. We are happy to supply customers with high quality products. We manufacture goods or import them directly from the manufacturer, so we always offer products at the lowest price on the market.

In order to shorten the supply time of receipt products, we work with the strongest market leaders in this field, whose quality of service and work has never disappointed us. Cooperation based on trust and teamwork is a guarantee of quality. Together, we pursue a common goal - to supply and transport goods at the lowest market price.

CONTACT US

“Baltic Masks” sales team is in a stage of active search of authorized partners all over Europe, who could work in the name of “Baltic Masks” (InSpe) and participate in government procurement tenders for Personal Protection Equipment (FFP2 face masks). If you are interested in cooperation please ask for dealership application form.



    COMPANY DETAILS

    Baltic Masks, UAB
    Registration number: 305709371
    VAT code: LT100013839515
    Account No .: LT34 3500 0100 1152 5155, Paysera LT, Bank code: 35000,
    SWIFT: EVIULT21XXX Account No 2 .: LT097300010166911771, Swedbank LT,
    SWIFT: HABALT22

    +37065992104

    info@balticmasks.com