FFP2 mask BM-026 NR D medical respirator (2pcs.)

This FFP2 mask/respirator is designed to achieve a close and comfortable facial fit. This face mask has a very efficient filtration of airborne particles so it provides a higher degree of protection than a surgical, medical, or cloth mask.

FFP2 mask/respirator provide a barrier to at least 94% of particles measuring larger than 0.3 microns and may be used in environments where hazardous substances exceed the OEL by up to a maximum of tenfold concentration. Respirators are also used in healthcare facilities.

All in all these masks are suitable for reducing the chances of getting coronavirus infection and more.

• With nose clip and rubber straps around the ears (additional adjustable strap for use around the head)
• Folding flat mask;
• Breathing valve: No;
• Classification: FFP2 (corresponds to US N95);
• EU declaration of conformity: EN 14683:2019+AC:2019 TYPE IIR, EN149:2001+A1:2009
• CE marking.

Users manual:
1. Before opening the package, wash your hands thoroughly with soap and water or disinfect your hands with a disinfectant (containing at least 60% alcohol);
2. Holding the rubber bands, unfold the mask with both hands;
3. Put the mask on your face covering your mouth and nose;
4. Pull the rubber straps towards the ears and place or attach the straps to the adjustable strap and fasten around the head;
5. Adjust the position of the nose clip until you completely cover the nose;
6. Press the mask against your face with both hands.
Precautions:
1. This product is not intended to be used for protection against harmful gases, vapors or fatty aerosols;
2. This product does not generate oxygen and is not intended for use in a low pressure environment;
3. It is not recommended to use the mask if it does not fit completely on the face when applying the mask;
4. If you notice that the mask is damaged, leaking, or you have difficulty breathing while using the mask, replace the mask immediately;
5. This product is disposable. The recommended duration of use is 4-8 hours.

About FFP

https://en.wikipedia.org/wiki/FFP_standards

• Aerosol filtration percentage: 94% minimum.
• Internal leak rate: maximum 8%.

This mask offers protection in various areas such as the glass industry and foundry, construction, pharmaceutical industry also agriculture. It effectively stops powdered chemicals. This mask can also serve as protection against respiratory viruses such as avian influenza or severe acute respiratory syndrome associated with the coronavirus. (SARS), as well as against the bacteria of pneumonic plague and tuberculosis. It is similar to the US-standard N95 respirator.

Equally important

EN 149 tests the ability of masks to protect the wearers against inhaling liquid and dry aerosols. It makes no statement about, and does not specifically test the suitability of such masks for, infection control against airborne transmission of pathogens through respiratory droplets. An NHS study published in 2021 claimed switching to FFP3 “may have cut ward-based infection to zero”.

All Baltic Masks respirators :

https://balticmasks.com/shop/

• AR-22-YL-000145-02.pdf
• BM-026_EU_DECLARATION_eng_2022-01-12.pdf
• CW-PPER-1-09-2021-module-C2.pdf
• CW-PPER-19-07-2021-module-B.pdf